Department of Chemistry2024-11-1019990032-386110.1016/S0032-3861(98)00766-62-s2.0-0032810069http://dx.doi.org/10.1016/S0032-3861(98)00766-6https://hdl.handle.net/20.500.14288/16141High molecular weight segmented polyurethaneurea (PUU) copolymers based on an aliphatic diisocyanate, bis(4-isocyanatocyclohexyl)methane and mixed hydrophilic and hydrophobic soft segments were prepared. Hydrophilic blocks consisted of poly(ethyleneoxide) (PEO) of molecular weight 1450 g/mol, whereas the hydrophobic blocks were poly(tetramethylene oxide) of molecular weight 2000 g/mol. Ethylene diamine was used as the chain extender. Hard segment contents of the copolymers were kept constant at 18%, whereas PEO contents were varied between 0% and 50% by weight. Water vapor permeation rates (WVPR) of thin films (23-178 mu m) cast from dimethylformamide solutions were determined. In studies performed at 23 degrees C and 50% relative humidity, the relationship between PEO content and WVPR followed an S-shaped curve. For copolymers containing up to about 15% by weight of PEG, WVPR were fairly low. This was followed by a region where WVPR increased continuously for membranes containing between 15% and 30% PEG. Further increase in PEO content above 30% did not influence the WVPR substantially. There was also a dramatic increase in WVPR with an increase in temperature from 23 degrees C to 37 degrees C. Activation energy of permeation was determined to be 91.5 kJ for PUU containing 22.0% by weight of PEG. Equilibrium water absorption levels of PUU containing different levels of PEO in their backbone structures followed a similar trend to that of WVPR. Hydrophilic PUUs showed good tensile properties and mechanical integrity even at very high levels of water absorption.PolymersPolymerizationJournal Article1873-229181023400012Q19558