Publication:
Laser surface melting of 10 wt% mo alloyed hardfacing stellite 12 plasma transferred arc deposits: structural evolution and high temperature wear performance

Placeholder

School / College / Institute

Organizational Unit

Program

KU Authors

Co-Authors

Dilawary, Shaikh Asad Ali
Afzal, Muhammad
Atar, Erdem
Cimenoglu, Huseyin

Publication Date

Language

Embargo Status

Journal Title

Journal ISSN

Volume Title

Alternative Title

Abstract

Laser surface melting (LSM) process has been applied on the plasma transferred arc (PTA) deposited Stellite 12 and 10 wt% Mo alloyed Stellite 12 in this study. Following the LSM process, structural and mechanical property comparison of the LSMed surfaces has been made. Hardness of the LSMed surfaces was measured as 549 HV and 623 HV for the Stellite 12 and Stellite 12 + 10 wt% Mo deposits, respectively. Despite their different hardness and structural features, the LSMed surfaces exhibited similar tribological performance at room temperature (RT), where fatigue wear mechanism operates. However, the wear at 500 degrees C promotes tribo-oxide layer formation whose composition depended on the alloying with Mo. Thus, addition of 10 wt% Mo into Stellite 12 PTA deposit has remarkably enhanced the high temperature wear performance of the LSMed surface as a result of participation of complex oxide (CoMoO4) in tribo-oxide layer.

Source

Publisher

Elsevier Sci Ltd

Subject

Optics, Physics, Applied physics

Citation

Has Part

Source

Optics and Laser Technology

Book Series Title

Edition

DOI

10.1016/j.optlastec.2017.11.038

item.page.datauri

Link

Rights

Copyrights Note

Endorsement

Review

Supplemented By

Referenced By

0

Views

0

Downloads

View PlumX Details