Publication:
Impregnation of Ru(cod)(tmhd)(2) into PDMS film in supercritical carbon dioxide

dc.contributor.coauthorGe, Minglan
dc.contributor.coauthorDing, Fuchen
dc.contributor.departmentDepartment of Chemical and Biological Engineering
dc.contributor.kuauthorErkey, Can
dc.contributor.kuprofileFaculty Member
dc.contributor.otherDepartment of Chemical and Biological Engineering
dc.contributor.schoolcollegeinstituteCollege of Engineering
dc.contributor.yokid29633
dc.date.accessioned2024-11-10T00:05:50Z
dc.date.issued2012
dc.description.abstractMetallopolymer nanocomposites has attracted much attention recently. The impregnation of organometallic compound from the supercritical solution into the polymer matrix has several advantages. The impregnation process isotherm of bis(2,2,6,6-tetramethy1-3,5-heptanedionato) (1,5-cyclooctadiene) ruthenium (II) (Ru(cod)(tmhd)(2)) into polydimethylsiloxane (PDMS) film in supercritical carbon dioxide (scCO(2)) was investigated. The experiments for determining the isotherm were carried out at 40 degrees C and 10.34 MPa. It was found that the impregnation isotherm is linear up to the saturation concentration of the precursor in scCO(2) fluid phase. The slope of the linear curve defined equilibrium partition coefficient K provides a measure of the partitioning of Ru(cod)(tmhd)(2) between the PDMS film and scCO(2) fluid phase and it is constant under the same conditions. It showed that K is mainly govered by the density of scCO(2) and does not change much with temperature at a constant density of scCO(2).
dc.description.indexedbyWoS
dc.description.indexedbyScopus
dc.description.openaccessNO
dc.description.publisherscopeInternational
dc.description.sponsorshipAcademic Human Resources Development in Institutions of Higher Learning Under the Jurisdiction of Beijing Municipality [PHR20110517, PHR200907129, PHR20110836] This work was financially supported by the Funding Project for Academic Human Resources Development in Institutions of Higher Learning Under the Jurisdiction of Beijing Municipality (PHR20110517, PHR200907129, PHR201108362).
dc.description.volume418-420
dc.identifier.doi10.4028/www.scientific.net/AMR.418-420.2260
dc.identifier.eissnN/A
dc.identifier.isbn978-3-03785-326-9
dc.identifier.issn1022-6680
dc.identifier.quartileN/A
dc.identifier.scopus2-s2.0-84857927369
dc.identifier.urihttp://dx.doi.org/10.4028/www.scientific.net/AMR.418-420.2260
dc.identifier.urihttps://hdl.handle.net/20.500.14288/16509
dc.identifier.wos302668301147
dc.keywordsSupercritical impregnation
dc.keywordsPDMS film
dc.keywordsRu(cod)(tmhd)(2)
dc.keywordsIsotherm
dc.languageEnglish
dc.publisherTrans Tech Publications Ltd
dc.sourceMaterials Processing Technology, Pts 1-3
dc.subjectMaterials science
dc.subjectMaterials science
dc.subjectCoatings and films
dc.titleImpregnation of Ru(cod)(tmhd)(2) into PDMS film in supercritical carbon dioxide
dc.typeConference proceeding
dspace.entity.typePublication
local.contributor.authorid0000-0001-6539-7748
local.contributor.kuauthorErkey, Can
relation.isOrgUnitOfPublicationc747a256-6e0c-4969-b1bf-3b9f2f674289
relation.isOrgUnitOfPublication.latestForDiscoveryc747a256-6e0c-4969-b1bf-3b9f2f674289

Files