Publication:
Thermal analysis in Ti-6al-4V drilling

Simple item page
dc.contributor.coauthorPoulachon, Gerard
dc.contributor.coauthorRamirez, Christophe
dc.contributor.coauthorMarcon, Bertrand
dc.contributor.coauthorRossi, Frederic
dc.contributor.coauthorOuteiro, Jose C.
dc.contributor.coauthorKrebs, Michael
dc.contributor.departmentDepartment of Mechanical Engineering
dc.contributor.facultymemberYes
dc.contributor.kuauthorAkmal, Mohammad
dc.contributor.kuauthorLazoğlu, İsmail
dc.contributor.schoolcollegeinstituteCollege of Engineering
dc.date.accessioned2024-11-09T23:13:06Z
dc.date.issued2017
dc.description.abstractTi-6Al-4V is commonly used especially in aerospace and biomedical industries. This alloy is known as a difficult-to-cut material. Due to its poor thermal properties, the heat generated during machining processes traps near material deformation zones. This causes detrimental high temperatures for the cutting tools. This article combines the analytical and FEM modeling techniques to estimate the temperature evolution of carbide tools in Ti-6Al-4V drilling. In this article, a novel thermocouple based temperature measurement setup is also introduced. Moreover, the simulated and measured temperatures under various cutting conditions for the drilling of Ti-6Al-4V are presented for the validation.
dc.description.fulltextNo
dc.description.harvestedfromManual
dc.description.indexedbyWOS
dc.description.indexedbyScopus
dc.description.openaccessYES
dc.description.peerreviewstatusPeer-Reviewed
dc.description.publisherscopeInternational
dc.description.readpublishN/A
dc.description.sponsoredbyTubitakEuN/A
dc.description.studentonlypublicationNo
dc.description.studentpublicationYes
dc.description.versionN/A
dc.identifier.WoSQuartileQ2
dc.identifier.doi10.1016/j.cirp.2017.04.020
dc.identifier.eissn1726-0604
dc.identifier.embargoN/A
dc.identifier.endpage108
dc.identifier.issn0007-8506
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85018880666
dc.identifier.startpage105
dc.identifier.urihttps://doi.org/10.1016/j.cirp.2017.04.020
dc.identifier.urihttps://hdl.handle.net/20.500.14288/9929
dc.identifier.volume66
dc.identifier.wos000407985900027
dc.keywordsDrilling
dc.keywordsTemperature
dc.keywordsTitanium cutting edge
dc.keywordsTemperature
dc.keywordsTool
dc.language.isoeng
dc.publisherElsevier
dc.relation.affiliationKoç University
dc.relation.collectionKoç University Institutional Repository
dc.relation.ispartofCIRP Annals-Manufacturing Technology
dc.relation.openaccessN/A
dc.rightsN/A
dc.subject Industrial engineering
dc.subject Manufacturing engineering
dc.titleThermal analysis in Ti-6al-4V drilling
dc.typeJournal Article
dspace.entity.typePublication
local.contributor.kuauthorLazoğlu, İsmail
local.contributor.kuauthorAkmal, Mohammad
relation.isOrgUnitOfPublicationba2836f3-206d-4724-918c-f598f0086a36
relation.isOrgUnitOfPublication.latestForDiscoveryba2836f3-206d-4724-918c-f598f0086a36
relation.isParentOrgUnitOfPublication8e756b23-2d4a-4ce8-b1b3-62c794a8c164
relation.isParentOrgUnitOfPublication.latestForDiscovery8e756b23-2d4a-4ce8-b1b3-62c794a8c164

Files

Collections

Publications without Fulltext