Publication: Evolution of transformation plasticity during bainitic transformation
Loading...
Program
KU-Authors
Organization Authors
Co-Authors
Lambers, Hans Gerd
Tschumak, Sergej
Maier, Hans Juergen
Date
Language
Type
Embargo Status
N/A
Journal Title
Journal ISSN
Volume Title
Alternative Title
Abstract
The influences of prior austenitization treatment and the state of applied stresses on the evolution of transformation plasticity strains during isothermal bainitic phase transformation and the resulting microstructures were examined. The key finding is that, upon pre-straining, the amount of transformation plasticity strain under superimposed elastic stresses is dictated by both the prior austenite grain size and the (0.01 % offset) yield strength of the supercooled austenite. Furthermore, the superimposition of internal stresses present due to pre-straining and externally applied stresses results in transformation plasticity strains similar to those obtained when a permanent stress equivalent to the 0.01 % offset yield strength of the supercooled austenite is applied. Another important result is that lower transformation plasticity strains were observed when decreasing the austenite grain size, which is accompanied by an increase in grain boundary area per volume, hindering the growth of preferred variants. Overall, the results clearly lay out the influence of austenite grain size and the particular 0.01 % offset yield strength of the supercooled austenite in limiting the transformation plasticity strains, which has to be incorporated into current models involving bainitic phase transformations.
Source
Publisher
Walter de Gruyter GmbH
Citation
item.page.haspartof
Source
International Journal of Materials Research
item.page.ispartofseries
item.page.edition
DOI
10.3139/146.110558
item.page.datauri
item.page.link
Rights
N/A
Copyrights Note
Rights and licensing
N/A
