Publications with Fulltext
Permanent URI for this collectionhttps://hdl.handle.net/20.500.14288/6
Browse
88 results
Search Results
Publication Open Access Ground-state cooling of mechanical resonatorsby quantum reservoir engineering(Springer Nature, 2021) Department of Physics; Müstecaplıoğlu, Özgür Esat; Naseem, Muhammad Tahir; Faculty Member; Department of Physics; College of Sciences; Graduate School of Sciences and Engineering; 1674; N/ACooling a mechanical oscillator to its ground state underpins many applications ranging from ultra-precise sensing to quantum information processing. The authors propose a new scheme that addresses the problem of the simultaneous cooling of many mechanical resonators with nearby frequencies. Ground-state cooling of multiple mechanical resonators becomes vital to employ them in various applications ranging from ultra-precise sensing to quantum information processing. Here we propose a scheme for simultaneous cooling of multiple degenerate or near-degenerate mechanical resonators to their quantum ground-state, which is otherwise a challenging goal to achieve. As opposed to standard laser cooling schemes where coherence renders the motion of a resonator to its ground-state, we consider an incoherent thermal source to achieve the same aim. The underlying physical mechanism of cooling is explained by investigating a direct connection between the laser sideband cooling and ""cooling by heating"". Our advantageous scheme of cooling enabled by quantum reservoir engineering can be realized in various setups, employing parametric coupling of a cooling agent with the target systems. We also discuss using non-thermal baths to simulate ultra-high temperature thermal baths for cooling.Publication Open Access Fundamental transfer matrix and dynamical formulation of stationary scattering in two and three dimensions(American Physical Society (APS), 2021) Loran, Farhang; Department of Mathematics; Department of Physics; Mostafazadeh, Ali; Faculty Member; Department of Mathematics; Department of Physics; College of Sciences; 4231We offer a consistent dynamical formulation of stationary scattering in two and three dimensions (2D and 3D) that is based on a suitable multidimensional generalization of the transfer matrix. This is a linear operator acting in an infinite-dimensional function space which we can represent as a 2 x 2 matrix with operator entries. This operator encodes the information about the scattering properties of the potential and enjoys an analog of the composition property of its one-dimensional ancestor. Our results improve an earlier attempt in this direction [Phys. Rev. A 93, 042707 (2016)] by elucidating the role of the evanescent waves. We show that a proper formulation of this approach requires the introduction of a pair of intertwined transfer matrices, each related to the time-evolution operator for an effective nonunitary quantum system. We study the application of our findings in the treatment of the scattering problem for delta-function potentials in 2D and 3D and clarify its implicit regularization property which circumvents the singular terms appearing in the standard treatments of these potentials. We also discuss the utility of our approach in characterizing invisible (scattering-free) potentials and potentials for which the first Born approximation provides the exact expression for the scattering amplitude.Publication Open Access Understanding fundamental trade-offs in nanomechanical resonant sensors(American Institute of Physics (AIP) Publishing, 2021) Department of Electrical and Electronics Engineering; Demir, Alper; Faculty Member; Department of Electrical and Electronics Engineering; College of Engineering; 3756Nanomechanical resonators are used as high performance detectors in a variety of applications such as mass spectrometry and atomic force microscopy. Initial emphasis in nanomechanical resonant sensors based on tracking resonance frequency deviations was on increasing the sensitivity to the level of a single molecule, atom, and beyond. On the other hand, there are applications where the speed of detection is crucial, prompting recent works that emphasize sensing schemes with improved time resolution. Here, we first develop a general modeling framework and a comprehensive theory encompassing all resonance frequency tracking schemes currently in use. We then explore the fundamental trade-offs between accuracy and speed in three resonant sensor architectures, namely, the feedback-free open-loop approach, positive-feedback based self-sustaining oscillator, and negative-feedback based frequency-locked loop scheme. We comparatively analyze them in a unified manner, clarify some misconceptions and confusion that seem to exist in the literature, and unravel their speed vs accuracy characteristics.Publication Open Access HIPPIE: a new platform for ambient-pressure X-ray photoelectron spectroscopy at the MAX IV Laboratory(International Union of Crystallography (IUCr), 2021) Zhu, Suyun; Scardamaglia, Mattia; Kundsen, Jan; Sankari, Rami; Tarawneh, Hamed; Temperton, Robert; Pickworth, Louisa; Cavalca, Filippo; Wang, Chunlei; Tissot, Heloise; Weissenrieder, Jonas; Hagman, Benjamin; Gustafson, Johan; Lindgren, Fredrik; Kallquist, Ida; Maibach, Julia; Hahlin, Maria; Boix, Virginia; Gallo, Tamires; Rehman, Foqia; D'Acunto, Giulio; Schnadt, Joachim; Shavorskiy, Andrey; Department of Chemistry; Kaya, Sarp; Faculty Member; Department of Chemistry; College of Sciences; 116541HIPPIE is a soft X-ray beamline on the 3 GeV electron storage ring of the MAX IV Laboratory, equipped with a novel ambient-pressure X-ray photoelectron spectroscopy (APXPS) instrument. The endstation is dedicated to performing in situ and operando X-ray photoelectron spectroscopy experiments in the presence of a controlled gaseous atmosphere at pressures up to 30 mbar [1 mbar = 100 Pa] as well as under ultra-high-vacuum conditions. The photon energy range is 250 to 2200 eV in planar polarization and with photon fluxes >10(12) photons s(-1) (500 mA ring current) at a resolving power of greater than 10000 and up to a maximum of 32000. The endstation currently provides two sample environments: a catalysis cell and an electrochemical/liquid cell. The former allows APXPS measurements of solid samples in the presence of a gaseous atmosphere (with a mixture of up to eight gases and a vapour of a liquid) and simultaneous analysis of the inlet/outlet gas composition by online mass spectrometry. The latter is a more versatile setup primarily designed for APXPS at the solid-liquid (dip-and-pull setup) or liquid-gas (liquid microjet) interfaces under full electrochemical control, and it can also be used as an open port for ad hoc-designed non-standard APXPS experiments with different sample environments. The catalysis cell can be further equipped with an IR reflection-absorption spectrometer, allowing for simultaneous APXPS and IR spectroscopy of the samples. The endstation is set up to easily accommodate further sample environments.Publication Open Access Distinguishing genuine Imperial Qing Dynasty porcelain from ancient replicas by on-site non-invasive XRF and Raman spectroscopy(Multidisciplinary Digital Publishing Institute (MDPI), 2022) Colomban, P.; Gironda, M.; d'Abrigeon, P.; Franci, Gülsu Şimşek; Researcher; Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM)The combined use of non-invasive on-site portable techniques, Raman microscopy, and X-ray fluorescence spectroscopy on seven imperial bowls and two decorated dishes, attributed to the reigns of the Kangxi, Yongzheng, Qianlong, and Daoguang emperors (Qing Dynasty), allows the identification of the coloring agents/opacifiers and composition types of the glazes and painted enamels. Particular attention is paid to the analysis of the elements used in the (blue) marks and those found in the blue, yellow, red, and honey/gilded backgrounds on which, or in reserve, a floral motif is principally drawn. The honey-colored background is made with gold nanoparticles associated with a lead- and arsenic-based flux. One of the red backgrounds is also based on gold nanoparticles, the second containing copper nanoparticles, both in lead-based silicate enamels like the blue and yellow backgrounds. Tin and arsenic are observed, but cassiterite (SnO2) is clearly observed in one of the painted decors (dish) and in A676 yellow, whereas lead (calcium/potassium) arsenate is identified in most of the enamels. Yellow color is achieved with Pb-Sn-Sb pyrochlore (Naples yellow) with various Sb contents, although green color is mainly based on lead-tin oxide mixed with blue enamel. The technical solutions appear very different from one object to another, which leads one to think that each bowl is really a unique object and not an item produced in small series. The visual examination of some marks shows that they were made in overglaze (A608, A616, A630, A672). It is obvious that different types of cobalt sources were used for the imprinting of the marks: cobalt rich in manganese for bowl A615 (Yongzheng reign), cobalt rich in arsenic for bowl A613 (but not the blue mark), cobalt with copper (A616), and cobalt rich in arsenic and copper (A672). Thus, we have a variety of cobalt sources/mixtures. The high purity of cobalt used for A677 bowl indicates a production after similar to 1830-1850.Publication Open Access Atom-dimer and dimer-dimer scatterings in a spin-orbit-coupled Fermi gas(American Physical Society (APS), 2021) Department of Physics; Işkın, Menderes; Faculty Member; Department of Physics; College of Sciences; 29659Using the diagrammatic approach, here we study how spin-orbit coupling (SOC) affects the fermion-dimer and dimer-dimer scattering lengths in the Born approximation, and we benchmark their accuracy with the higher-order approximations. We consider both isotropic and Rashba couplings in three dimensions and show that the Born approximation gives accurate results in the 1/(mαas)≪-1 limit, where m is the mass of the fermions, α is the strength of the SOC, and as is the s-wave scattering length between fermions. This is because the higher-loop contributions form a perturbative series in the 1/(mαas)<0 region that is controlled by the smallness of the residue Z of the dimer propagator. In sharp contrast, since Z grows with the square root of the binding energy of the dimer in the 1/(mαas)>0 region, all of the higher-loop contributions are of similar order.Publication Open Access Exciton recycling via InP quantum dot funnels for luminescent solar concentrators(Tsinghua University, 2021) Ow-Yang, Cleva W.; N/A; N/A; Department of Physics; Department of Electrical and Electronics Engineering; Jalali, Houman Bahmani; Sadeghi, Sadra; Toker, Işınsu Baylam; Han, Mertcan; Sennaroğlu, Alphan; Nizamoğlu, Sedat; PhD Student; Master Student; Faculty Member; Faculty Member; Department of Physics; Department of Electrical and Electronics Engineering; Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; College of Engineering; N/A; N/A; N/A; N/A; 23851; 130295Luminescent solar concentrators (LSC) absorb large-area solar radiation and guide down-converted emission to solar cells for electricity production. Quantum dots (QDs) have been widely engineered at device and quantum dot levels for LSCs. Here, we demonstrate cascaded energy transfer and exciton recycling at nanoassembly level for LSCs. The graded structure composed of different sized toxic-heavy-metal-free InP/ZnS core/shell QDs incorporated on copper doped InP QDs, facilitating exciton routing toward narrow band gap QDs at a high nonradiative energy transfer efficiency of 66%. At the final stage of non-radiative energy transfer, the photogenerated holes make ultrafast electronic transitions to copper-induced mid-gap states for radiative recombination in the near-infrared. The exciton recycling facilitates a photoluminescence quantum yield increase of 34% and 61% in comparison with semi-graded and ungraded energy profiles, respectively. Thanks to the suppressed reabsorption and enhanced photoluminescence quantum yield, the graded LSC achieved an optical quantum efficiency of 22.2%. Hence, engineering at nanoassembly level combined with nonradiative energy transfer and exciton funneling offer promise for efficient solar energy harvesting.Publication Open Access Laser-inscribed diamond waveguide resonantly coupled to diamond microsphere(Multidisciplinary Digital Publishing Institute (MDPI), 2020) Le Phu, T.; Giakoumaki, A.; Bharadwaj, V.; Ramponi, R.; Eaton, S.M.; Department of Physics; Yavuz, Nurperi; Bayer, Mustafa Mert; Çirkinoğlu, Hüseyin Ozan; Serpengüzel, Ali; Master Student; Faculty Member; Department of Physics; Graduate School of Sciences and Engineering; College of Sciences; N/A; N/A; N/A; 27855An all-diamond photonic circuit was implemented by integrating a diamond microsphere with a femtosecond-laser-written bulk diamond waveguide. The near surface waveguide was fabricated by exploiting the Type II fabrication method to achieve stress-induced waveguiding. Transverse electrically and transverse magnetically polarized light from a tunable laser operating in the near-infrared region was injected into the diamond waveguide, which when coupled to the diamond microsphere showed whispering-gallery modes with a spacing of 0.33 nm and high-quality factors of 105. By carefully engineering these high-quality factor resonances, and further exploiting the properties of existing nitrogen-vacancy centers in diamond microspheres and diamond waveguides in such configurations, it should be possible to realize filtering, sensing and nonlinear optical applications in integrated diamond photonics.Publication Open Access A diversity combination model incorporating an inward bias for interaural time-level difference cue integration in sound lateralization(Multidisciplinary Digital Publishing Institute (MDPI), 2020) N/A; Department of Computer Engineering; Mojtahedi, Sina; Erzin, Engin; Ungan, Pekcan; Faculty Member; Faculty Member; Department of Computer Engineering; Graduate School of Sciences and Engineering; College of Engineering; School of Medicine; N/A; 34503; N/AA sound source with non-zero azimuth leads to interaural time level differences (ITD and ILD). Studies on hearing system imply that these cues are encoded in different parts of the brain, but combined to produce a single lateralization percept as evidenced by experiments indicating trading between them. According to the duplex theory of sound lateralization, ITD and ILD play a more significant role in low-frequency and high-frequency stimulations, respectively. In this study, ITD and ILD, which were extracted from a generic head-related transfer functions, were imposed on a complex sound consisting of two low- and seven high-frequency tones. Two-alternative forced-choice behavioral tests were employed to assess the accuracy in identifying a change in lateralization. Based on a diversity combination model and using the error rate data obtained from the tests, the weights of the ITD and ILD cues in their integration were determined by incorporating a bias observed for inward shifts. The weights of the two cues were found to change with the azimuth of the sound source. While the ILD appears to be the optimal cue for the azimuths near the midline, the ITD and ILD weights turn to be balanced for the azimuths far from the midline.Publication Open Access Finger-actuated microneedle array for sampling body fluids(Multidisciplinary Digital Publishing Institute (MDPI), 2021) Ahmadpour, Abdollah; Yetişen, Ali K.; Department of Mechanical Engineering; Taşoğlu, Savaş; Sarabi, Misagh Rezapour; Faculty Member; Department of Mechanical Engineering; KU Arçelik Research Center for Creative Industries (KUAR) / KU Arçelik Yaratıcı Endüstriler Uygulama ve Araştırma Merkezi (KUAR); Koç University Research Center for Translational Medicine (KUTTAM) / Koç Üniversitesi Translasyonel Tıp Araştırma Merkezi (KUTTAM); College of Engineering; Graduate School of Sciences and Engineering; 291971; N/AThe application of microneedles (MNs) for minimally invasive biological fluid sampling is rapidly emerging, offering a user-friendly approach with decreased insertion pain and less harm to the tissues compared to conventional needles. Here, a finger-powered microneedle array (MNA) integrated with a microfluidic chip was conceptualized to extract body fluid samples. Actuated by finger pressure, the microfluidic device enables an efficient approach for the user to collect their own body fluids in a simple and fast manner without the requirement for a healthcare worker. The processes for extracting human blood and interstitial fluid (ISF) from the body and the flow across the device, estimating the amount of the extracted fluid, were simulated. The design in this work can be utilized for the minimally invasive personalized medical equipment offering a simple usage procedure.