Research Outputs
Permanent URI for this communityhttps://hdl.handle.net/20.500.14288/2
Browse
256 results
Search Results
Publication Metadata only 3D printed poly(lactic acid) scaffolds modified with chitosan and hydroxyapatite for bone repair applications(Elsevier, 2020) N/A; N/A; N/A; N/A; Department of Chemistry; Department of Chemical and Biological Engineering; Department of Chemistry; Nazeer, Muhammad Anwaar; Önder, Özgün Can; Sevgili, İlkem; Yılgör, Emel; Kavaklı, İbrahim Halil; Yılgör, İskender; PhD Student; PhD Student; PhD Student; Researcher; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Department of Chemistry; Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Sciences; College of Engineering; College of Sciences; N/A; N/A; N/A; N/A; 40319; 241813D printed poly(lactic acid) (PLA) scaffolds surface modified with chitosan (CS) and hydroxyapatite (HA) to produce a novel bioactive composite scaffold is reported. Excellent mechanical properties of PLA, the bioactivity of CS, and osteogenic characteristics of HA are combined to fabricate composite scaffolds using a simple desktop 3D printer. Scaffolds were characterized through attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD) and water contact angle measurements before and after modification. Formic acid was used as a solvent to prepare stable CS/HA dispersions and was found to be a suitable solvent for producing PLA/CS/HA composites. Surface properties of modified scaffolds were superior in terms of hydrophilicity and bioactivity, which resulted in enhanced attachment and proliferation of human osteosarcoma cells in vitro compared to the unmodified PLA scaffolds.Publication Metadata only 3D printing of cytocompatible gelatin-cellulose-alginate blend hydrogels(Wiley-V C H Verlag Gmbh, 2020) Erkoc, Pelin; Uvak, Ileyna; Odeh, Yazan Nitham; Akdogan, Ozan; Odeh, Yazan Nitham; Akdogan, Ozan; N/A; Department of Chemistry; Department of Chemical and Biological Engineering; Nazeer, Muhammad Anwaar; Batool, Syeda Rubab; Kızılel, Seda; PhD Student; Researcher; Faculty Member; Department of Chemistry; Department of Chemical and Biological Engineering; Graduate School of Sciences and Engineering; College of Sciences; College of Engineering; N/A; N/A; 283763D bioprinting of hydrogels has gained great attention due to its potential to manufacture intricate and customized scaffolds that provide favored conditions for cell proliferation. Nevertheless, plain natural hydrogels can be easily disintegrated, and their mechanical strengths are usually insufficient for printing process. Hence, composite hydrogels are developed for 3D printing. This study aims to develop a hydrogel ink for extrusion-based 3D printing which is entirely composed of natural polymers, gelatin, alginate, and cellulose. Physicochemical interactions between the components of the intertwined gelatin-cellulose-alginate network are studied via altering copolymer ratios. The structure of the materials and porosity are assessed using infrared spectroscopy, swelling, and degradation experiments. The utility of this approach is examined with two different crosslinking strategies using glutaraldehyde or CaCl2. Multilayer cylindrical structures are successfully 3D printed, and their porous structure is confirmed by scanning electron microscopy and Brunauer-Emmett-Teller surface area analyses. Moreover, cytocompatibility of the hydrogel scaffolds is confirmed on fibroblast cells. The developed material is completely natural, biocompatible, economical, and the method is facile. Thus, this study is important for the development of advanced functional 3D hydrogels that have considerable potential for biomedical devices and artificial tissues.Publication Metadata only [BMIM][OAc] coating layer makes activated carbon almost completely selective for CO2(Elsevier Science Sa, 2022) N/A; N/A; Department of Chemical and Biological Engineering; Department of Chemical and Biological Engineering; Durak, Özce; Zeeshan, Muhammad; Keskin, Seda; Uzun, Alper; Master Student; PhD Student; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; College of Engineering; N/A; N/A; 40548; 59917Tuning the molecular affinity of porous materials towards desired gases is important to achieve superior selectivity for a target separation. Herein, we report a novel composite, prepared by coating an ordinary activated carbon (AC) with an ionic liquid (IL) (1-butyl-3-methylimidazolium acetate, [BMIM][OAc]) offering an almost complete CO2 selectivity over N-2 and CH4. Data indicated that pore blockage by the IL accompanied with the enhancement in polarity and reduction in the hydrophobic character of the surface hindered the sorption of N-2 and CH4. For CO2, on the other hand, new chemisorption and physisorption sites became available associated with the IL layer on the surface, making the composite material significantly selective. Newly formed chemisorption sites attributed to the cation's acidic C2H sites, which become available with bi-layer formation. Presence of multiple competitive sorption sites with different energies was further proven with thermal analysis and detailed spectroscopic analysis. Data showed that CO2/CH4 and CO2/N-2 ideal selectivities boosted from 3.3 to 688.3 (2.3 to 54.7) and from 15.6 to 903.7 (7.1 to 74.3) at 0.1 (1) bar and 25 degrees C, respectively, upon the deposition of IL layer. Especially at lower pressures, the IL/AC material became almost fully selective for CO2 offering ideal selectivities in the order of several tens of thousands. To the best of our knowledge, the remarkable enhancement in the ideal CO2 selectivity by a straightforward post-synthesis modification of an ordinary AC, as reported here, sets a new benchmark in high-performance and efficient gas separation for similar porous materials.Publication Metadata only A CLOCK-binding small molecule disrupts the interaction between CLOCK and BMAL1 and enhances circadian rhythm amplitude(Elsevier, 2020) Akyel, Yasemin Kübra; Yılmaz, Fatma; Öztürk, Nuri; Öztürk, Narin; Okyar, Alper; N/A; N/A; Department of Chemical and Biological Engineering; N/A; Department of Molecular Biology and Genetics; Department of Industrial Engineering; Department of Chemical and Biological Engineering; Doruk, Yağmur Umay; Yarparvar, Darya; Gül, Şeref; Taşkın, Ali Cihan; Barış, İbrahim; Türkay, Metin; Kavaklı, İbrahim Halil; Master Student; PhD Student; Researcher; Other; Teaching Faculty; Faculty Member; Faculty Member; Department of Molecular Biology and Genetics; Department of Industrial Engineering; Department of Chemical and Biological Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; N/A; College of Sciences; College of Engineering; College of Engineering; N/A; N/A; N/A; 291296; 111629; 24956; 40319Proper function of many physiological processes requires a robust circadian clock. Disruptions of the circadian clock can result in metabolic diseases, mood disorders, and accelerated aging. Therefore, identifying small molecules that specifically modulate regulatory core clock proteins may potentially enable better management of these disorders. In this study, we applied a structure-based molecular-docking approach to find small molecules that specifically bind to the core circadian regulator, the transcription factor circadian locomotor output cycles kaput (CLOCK). We identified 100 candidate molecules by virtual screening of ?2 million small molecules for those predicted to bind closely to the interface in CLOCK that interacts with its transcriptional co-regulator, Brain and muscle Arnt-like protein-1 (BMAL1). Using a mammalian two-hybrid system, real-time monitoring of circadian rhythm in U2OS cells, and various biochemical assays, we tested these compounds experimentally and found one, named CLK8, that specifically bound to and interfered with CLOCK activity. We show that CLK8 disrupts the interaction between CLOCK and BMAL1 and interferes with nuclear translocation of CLOCK both in vivo and in vitro. Results from further experiments indicated that CLK8 enhances the amplitude of the cellular circadian rhythm by stabilizing the negative arm of the transcription/translation feedback loop without affecting period length. Our results reveal CLK8 as a tool for further studies of CLOCK's role in circadian rhythm amplitude regulation and as a potential candidate for therapeutic development to manage disorders associated with dampened circadian rhythms.Publication Metadata only A facile method for cross-linking of methacrylated wood fibers for engineered wood composites(Elsevier B.V., 2023) Bengü, Başak; Biçer, Aziz; Yarıcı, Tugay; N/A; N/A; N/A; Department of Chemical and Biological Engineering; Department of Chemical and Biological Engineering; Sarıoğlu, Ebru; Turhan, Emine Ayşe; Karaz, Selcan; Erkey, Can; Şenses, Erkan; PhD Student; PhD Student; Master Student; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM), Koç University Boron and Advanced Materials Application and Research Center (KUBAM) / Koç Üniversitesi Bor ve İleri Malzemeler Uygulama ve Araştırma Merkezi (KUBAM); Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; College of Engineering; N/A; N/A; N/A; 29633; 280298Chemical modifications are widely used to enhance the properties of wood composites and create a strong bonding mechanism for enhancing the dimensional stability, water resistance as well as decreasing carcinogenic formaldehyde emission. Esterification is the most-known modification way to enhance the durability of wood composites, but it does not improve mechanical performance. In this work, we demonstrated a two-step, easy and quick wood surface modification strategy based on microwave heating and UV crosslinking. Firstly, the fiber surface was reacted with methacrylic anhydride, then using methacrylated groups on wood, the fibers are covalently linked. As a proof-of-concept the fibers cross-linked within five minutes under UV radiation using benzophenone solution. Then, the effect of crosslinked wood fiber on the properties of mechanical and swelling of fiberboard were studied. Using SEM, FTIR-ATR, and swelling tests, we investigated the wood-based products' reaction mechanism, morphology, and internal bonding strength. The chemical cross-linking gives stronger bonding, compared to hydrogen bonding, between fibers even in wet conditions, resulting in a cross-linked foam-like structure. Also, wood panels were fabricated, compared to unmodified fibers, the internal bond strength and dimensional stability of fiberboards increased slightly. Overall, these results show that chemical cross-linking of wood fibers can be a fast and promising way to produce multi-functional wood composites.Publication Open Access A mixed-integer linear programming based training and feature selection method for artificial neural networks using piece-wise linear approximations(Elsevier, 2022) Şıldır, Hasan; Department of Chemical and Biological Engineering; Aydın, Erdal; Faculty Member; Department of Chemical and Biological Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); College of EngineeringArtificial Neural Networks (ANNs) may suffer from suboptimal training and test performance related issues not only because of the presence of high number of features with low statistical contributions but also due to their non-convex nature. This study develops piecewise-linear formulations for the efficient approximation of the non-convex activation and objective functions in artificial neural networks for optimal, global and simultaneous training and feature selection in regression problems. Such formulations include binary variables to account for the existence of the features and piecewise-linear approximations, which in turn, after one exact linearization step, calls for solving a mixed-integer linear programming problem with a global optimum guarantee because of convexity. Suggested formulation is implemented on two industrial case studies. Results show that efficient approximations are obtained through the usage of the method with only a few number of breakpoints. Significant feature space reduction is observed bringing about notable improvement in test accuracy.Publication Open Access A new class of porous materials for efficient CO2 separation: ionic liquid/graphene aerogel composites(Elsevier, 2021) Department of Chemical and Biological Engineering; N/A; Department of Chemistry; Zeeshan, Muhammad; Yalçın, Kaan; Keskin, Seda; Uzun, Alper; Öztuna, Feriha Eylül Saraç; Ünal, Uğur; PhD Student; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Department of Chemistry; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; College of Engineering; College of Sciences; N/A; N/A; 40548; 59917; N/A; 42079Here, we report a new post-synthesis modification strategy for functionalizing reduced graphene aerogels (rGAs) towards an exceptional CO2 separation performance. 1-N-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) was impregnated on a rGA, prepared by reducing GA at 700 degrees C, at various ionic liquid (IL) loadings of 5, 10, 30, and 50 wt%. The resulting composites were characterized in deep detail by X-ray photoelectron spectroscopy, X-ray diffraction, N-2 physical adsorption measurements, scanning electron microscopy, Fourier transform infrared and Raman spectroscopies, and thermogravimetric analysis. Results indicated the presence of interactions between the rGA surface and the anion of the IL, potentially improving the CO2 affinity. Volumetric gas adsorption measurements using these materials showed that the deposition of [BMIM][PF6] on rGA surface at an IL loading of 50 wt% boosts the CO2/CH4 selectivity by more than 20-times, exceeding an absolute value of 120, a remarkably higher CO2/CH4 selectivity compared to that of other functionalized materials under similar operating conditions. Tunability of both the IL structure and the surface characteristics of rGA offer a tremendous degree of flexibility for the rational design of these IL/rGA composites towards high performance in gas separation applications.Publication Metadata only A novel alkali activated magnesium silicate as an effective and mechanically strong adsorbent for methylene blue removal(Elsevier, 2022) Kaya Özkiper, Kardelen; Soyer Uzun, Sezen; Department of Chemical and Biological Engineering; Uzun, Alper; Faculty Member; Department of Chemical and Biological Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); College of Engineering; 59917A novel, cheap, and easy-to-synthesize sepiolite-based alkali-activated material (Sep-AAM), synthesized by the reaction of a magnesium silicate source, sepiolite, with sodium silicate solution, demonstrating high mechanical strength and methylene blue (MB) removal performance is introduced. Kinetics data indicated that MB adsorption occurs through pseudo-second-order adsorption kinetics model, while the Langmuir isotherm model provided a better fit to adsorption isotherms. The Sep-AAM provided a removal capacity of 99.92 mg g-1 at 50 degrees C, setting a new benchmark value among the materials used for this purpose. Thermodynamical parameters indicated that the adsorption of MB onto Sep-AAM was endothermic and the interaction between Sep-AAM and MB included weak chemical bonding. Regenerability of the Sep-AAM in powder and monolith forms was confirmed up to four-cycles. Structural parameters determined by several characterization tools demonstrated that the surface hydroxyl groups are responsible for the superior MB adsorption performance. The mechanical strength measurements showed that Sep-AAM in monolith form displayed a remarkable compressive strength value of 40 MPa. To establish a new approach forward on the development of AAMs for wastewater treatment, this study shows that sepiolite can effectively be utilized and Sep-AAM provides a sustainable solution for dye removal with advanced mechanical properties.Publication Open Access A novel IL/MOF/polymer mixed matrix membrane having superior CO2/N2 selectivity(Elsevier, 2022) Department of Chemical and Biological Engineering; Habib, Nitasha; Durak, Özce; Zeeshan, Muhammad; Uzun, Alper; Keskin, Seda; PhD Student; PhD Student; Faculty Member; Department of Chemical and Biological Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; College of Engineering; N/A; N/A; N/A; 59917; 40548In this work, we synthesized an ionic liquid (IL)/metal organic framework (MOF) composite, 1-ethyl-3-methylimidazolium acetate/copper-1,3,5-benzenetricarboxylate ([EMIM][OAc]/CuBTC) and used it as a filler in a polymer, Pebax, to fabricate novel IL/MOF/polymer mixed matrix membranes (MMMs). CuBTC/Pebax and [EMIM][OAc]/CuBTC/Pebax MMMs having different filler loadings of 10, 15, and 20 wt.% were prepared by solution casting method and characterized using various techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR), and thermogravimetric analysis (TGA). Uniform dispersion of MOF and IL/MOF fillers in the MMMs was observed. Incorporation of IL/MOF composite into Pebax significantly improved CO2 permeability and CO2/N2 selectivity of the polymer by 2.5- and 5.5-times, respectively. Gas permeability measurements showed that the MMM having 15 wt.% IL/MOF loading exhibits significantly higher CO2 permeability of 335 Barrer and CO2/N2 selectivity of 176 than the Pebax membrane having CO2 permeability of 135 Barrer and CO2/N2 selectivity of 32. CO2/N2 selectivity of the [EMIM][OAc]/CuBTC/Pebax MMM with 15 wt.% [EMIM][OAc]/CuBTC filler loading was the highest among the selectivity values reported for other types of IL/MOF/polymer MMMs in the literature. All the CuBTC/Pebax MMMs and [EMIM][OAc]/CuBTC/Pebax MMMs that we fabricated in this work exceeded the Robeson's updated upper bound, showing the excellent potential of these novel membranes for CO2/N2 separation.Publication Open Access A promising catalyst for the dehydrogenation of perhydro-dibenzyltoluene: Pt/Al2O3 prepared by supercritical CO2 deposition(Multidisciplinary Digital Publishing Institute (MDPI), 2022) Modisha, Phillimon; Garidzirai, Rudaviro; Rommel, Sarshad; Uzunlar, Erdal; Aindow, Mark; Bessarabov, Dmitri; Department of Chemical and Biological Engineering; Bozbağ, Selmi Erim; Erkey, Can; Güneş, Hande; Researcher; Faculty Member; Department of Chemical and Biological Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); College of Engineering; N/A; 29633; N/APt/Al2O3 catalysts prepared via supercritical deposition (SCD), with supercritical CO2, wet impregnation (WI) methods and a selected benchmark catalyst, were evaluated for the dehydrogenation of perhydro-dibenzyltoluene (H18-DBT) at 300 degrees C in a batch reactor. After ten dehydrogenation runs, the average performance of the catalyst prepared using SCD was the highest compared to the benchmark and WI-prepared catalysts. The pre-treatment of the catalysts with the product (dibenzyltoluene) indicated that the deactivation observed is mainly due to the adsorbed H0-DBT blocking the active sites for the reactant (H18-DBT). Furthermore, the SCD method afforded a catalyst with a higher dispersion of smaller sized Pt particles, thus improving catalytic performance towards the dehydrogenation of H18-DBT. The particle diameters of the SCD- and WI-prepared catalysts varied in the ranges of 0.6-2.2 nm and 0.8-3.4 nm and had average particle sizes of 1.1 nm and 1.7 nm, respectively. Energy dispersive X-ray spectroscopy analysis of the catalysts after ten dehydrogenation runs revealed the presence of carbon. In this study, improved catalyst performance led to the production of more liquid-based by-products and carbon material compared to catalysts with low catalytic performance.