Research Outputs
Permanent URI for this communityhttps://hdl.handle.net/20.500.14288/2
Browse
6 results
Search Results
Publication Metadata only An ultra-compact and wireless tag for battery-free sweat glucose monitoring(Elsevier Advanced Technology, 2022) N/A; Department of Mechanical Engineering; N/A; N/A; Department of Mechanical Engineering; N/A; N/A; N/A; N/A; Department of Mechanical Engineering; Mirzajani, Hadi; Abbasiasl, Taher; Mirlou, Fariborz; İstif, Emin; Bathaei, Mohammad Javad; Dağ, Çağdaş; Deyneli, Oğuzhan; Dereli, Dilek Yazıcı; Beker, Levent; Researcher; PhD Student; PhD Student; Other; PhD Student; Faculty Member; Faculty Member; Faculty Member; Faculty Member; Department of Mechanical Engineering; Koç Üniversitesi İş Bankası Enfeksiyon Hastalıkları Uygulama ve Araştırma Merkezi (EHAM) / Koç University İşbank Center for Infectious Diseases (KU-IS CID); n2STAR-Koç University Nanofabrication and Nanocharacterization Center for Scientifc and Technological Advanced Research; Koç University Research Center for Translational Medicine (KUTTAM) / Koç Üniversitesi Translasyonel Tıp Araştırma Merkezi (KUTTAM); College of Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; Graduate School of Sciences and Engineering; N/A; School of Medicine; School of Medicine; College of Engineering; N/A; N/A; N/A; N/A; N/A; N/A; 171914; 179659; 308798Glucose monitoring before, during, and after exercise is essential for people with diabetes as exercise increases the risk of activity-induced hyper- and hypo-glycemic events. The situation is even more challenging for athletes with diabetes as they have impaired metabolic control compared to sedentary individuals. In this regard, a compact and noninvasive wearable glucose monitoring device that can be easily worn is critical to enabling glucose monitoring. This report presents an ultra-compact glucose tag with a footprint and weight of 1.2 cm(2) and 0.13 g, respectively, for sweat analysis. The device comprises a near field communication (NFC) chip, antenna, electrochemical sensor, and microfluidic channels implemented in different material layers. The device has a flexible and conformal structure and can be easily attached to different body parts. The battery-less operation of the device was enabled by NFC-based wireless power transmission and the compact antenna. Femtosecond laser ablation was employed to fabricate a highly compact and flexible NFC antenna. The proposed device demonstrated excellent operating characteristics with a limit of detection (LOD), limit of quantification (LOQ), and sensitivity of 24 mu M, 74 mu M, and 1.27 mu A cm(-2) mM(-1), respectively. The response of the proposed sensor in sweat glucose detection and quantification was validated by nuclear magnetic resonance spectroscopy (NMR). Also, the device's capability in attachment to the body, sweat collection, and glucose measurement was demonstrated through in vitro and in vivo experiments, and satisfactory results were obtained.Publication Metadata only Detection of human kappa-opioid antibody using microresonators with integrated optical readout(Elsevier advanced Technology, 2010) N/A; N/A; N/A; N/A; Department of Mechanical Engineering; Department of Chemical and Biological Engineering; Department of Electrical and Electronics Engineering; Department of Mechanical Engineering; Timurdoğan, Erman; Özber, Natali; Nargül, Sezin; Yavuz, Serhat; Kılıç, M. Salih; Kavaklı, İbrahim Halil; Ürey, Hakan; Alaca, Burhanettin Erdem; PhD Student; Master Student; PhD Student; Master Student; Resercher; Faculty Member; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Department of Electrical and Electronics Engineering; Department of Mechanical Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; College of Engineering; College of Engineering; College of Engineering; N/A; N/A; N/A; N/A; N/A; 40319; 8579; 115108Label-free detection of the interaction between hexahistidine-tagged human kappa-opioid receptor membrane protein and anti-His antibody is demonstrated in liquid by an optical microelectromechanical system utilizing electromagnetically actuated microresonators Shift in resonance frequency due to accretion of mass on the sensitive surface of microresonators is monitored via an integrated optical readout a frequency resolution of 2 Hz is obtained Together with a sensitivity of 7 ppm/(ng/ml)) this leads to a minimum detectable antibody concentration of 57 ng/ml for a 50-kHz device the measurement principle is shown to impart immunity to environmental noise, facilitate operation in liquid media and bring about the prospect for further miniaturization of actuator and readout leading to a portable biochemical sensor.Publication Metadata only Digital monitoring of the microchannel filling flow dynamics using a non-contactless smartphone-based nano-liter precision flow velocity meter(Elsevier Advanced Technology, 2024) Xu, Weiming; Köydemir, Hatice Ceylan; Department of Mechanical Engineering; Atik, Abdulkadir Yasin; Beker, Levent; Department of Mechanical Engineering; Graduate School of Sciences and Engineering; College of EngineeringMicrofluidic systems find widespread applications in diagnostics, biological research, chemistry, and engineering studies. Among their many critical parameters, flow rate plays a pivotal role in maintaining the functionality of microfluidic systems, including droplet-based microfluidic devices and those used in cell culture. It also significantly influences microfluidic mixing processes. Although various flow rate measurement devices have been developed, the challenge remains in accurately measuring flow rates within customized channels. This paper presents the development of a 3D-printed smartphone-based flow velocity meter. The 3D-printed platform is angled at 30 degrees to achieve transparent flow visualization, and it doesn't require any external optical components such as external lenses and filters. Two LED modules integrated into the platform create a uniform illumination environment for video capture, powered directly by the smartphone. The performance of our platform, combined with a customized video processing algorithm, was assessed in three different channel types: uniform straight channels, straight channels with varying widths, and vessel-like channel patterns to demonstrate its versatility. Our device effectively measured flow velocities from 5.43 mm/s to 24.47 mm/s, with video quality at 1080p resolution and 60 frames per second, for which the measurement range can be extended by adjusting the frame rate. This flow velocity meter can be a useful analytical tool to evaluate and enhance microfluidic channel designs of various lab-on-a-chip applications.Publication Metadata only MEMS biosensor for detection of Hepatitis A and C viruses in serum(Elsevier Advanced Technology, 2011) N/A; N/A; Department of Mechanical Engineering; Department of Chemical and Biological Engineering; Department of Electrical and Electronics Engineering; Timurdoğan, Erman; Alaca, Burhanettin Erdem; Kavaklı, İbrahim Halil; Ürey, Hakan; PhD Student; Faculty Member; Faculty Member; Faculty Member; Department of Mechanical Engineering; Department of Chemical and Biological Engineering; Department of Electrical and Electronics Engineering; Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; College of Engineering; College of Engineering; College of Engineering; N/A; 115108; 40319; 8579Resonant microcantilever arrays are developed for the purpose of label-free and real-time analyte monitoring and biomolecule detection. MEMS cantilevers made of electroplated nickel are functionalized with Hepatitis antibodies. Hepatitis A and C antigens at different concentrations are introduced in undiluted bovine serum. All preparation and measurement steps are carried out in the liquid within a specifically designed flowcell without ever drying the cantilevers throughout the experiment. Both actuation and sensing are done remotely and therefore the MEMS cantilevers have no electrical connections, allowing for easily disposable sensor chips. Actuation is achieved using an electromagnet and the interferometric optical sensing is achieved using laser illumination and embedded diffraction gratings at the tip of each cantilever. Resonant frequency of the cantilevers in dynamic motion is monitored using a self-sustaining closed-loop control circuit and a frequency counter. Specificity is demonstrated by detecting both Hepatitis A and Hepatitis C antigens and their negative controls. This is the first report of Hepatitis antigen detection by resonant cantilevers exposed to undiluted serum. A dynamic range in excess of 1000 and with a minimum detectable concentration limit of 0.1 ng/ml (1.66 pM) is achieved for both Hepatitis A and C. This result is comparable to labeled detection methods such as ELISA.Publication Metadata only Optimization of ACEK-enhanced, PCB-based biosensor for highly sensitive and rapid detection of bisphenol a in low resource settings(Elsevier, 2022) Cheng, Cheng; Vafaie, Reza Hadjiaghaie; Wu, Jayne; Chen, Jiangang; Eda, Shigotoshi; Aghdam, Esmaeil Najafi; Ghavifekr, Habib Badri; Department of Mechanical Engineering; Mirzajani, Hadi; Researcher; Department of Mechanical Engineering; College of Engineering; N/AIn this study, we developed a low-cost and easy-to-use capacitive biosensor employing printed-circuit-board (PCB)-based technique for electrode fabrication and a specific alternative current (AC) signal for AC Electrokinetics (ACEK) effect excitation. Fast, accurate, and highly sensitive detection and quantification of bisphenol A (BPA) was achieved. An easy characterization of the biofunctionalization process is introduced by measuring interfacial capacitance which is simple and superior to most of methods currently in use. The frequency and amplitude of the AC signal used for capacitive interrogation were optimized to achieve maximum interfacial capacitance and maximum sensitivity. To evaluate the performance of the developed biosensor, its operation was compared with in-house microfabricated and commercially available electrodes. The limit-of-detection (LOD) obtained using the PCB-based electrodes was found to be at least one order of magnitude lower than that obtained with the commercial and in-house microfabricated electrodes. The linear range for BPA detection was wide from 1 fM to 10 pM with an LOD of 109.5 aM and sample to result in 20s. The biosensor operation was validated by spike-and-recovery tests of BPA using commercial food samples. Thus, the platform has a potential as an on-site detection of bisphenol A in low-resource settings.Publication Metadata only Powering smart contact lenses for continuous health monitoring: Recent advancements and future challenges(Elsevier Advanced Technology, 2022) N/A; Department of Mechanical Engineering; N/A; Department of Mechanical Engineering; N/A; Department of Mechanical Engineering; Mirzajani, Hadi; Mirlou, Fariborz; İstif, Emin; Singh, Rahul; Beker, Levent; Researcher; PhD Student; Other; PhD Student; Faculty Member; Department of Mechanical Engineering; College of Engineering; Graduate School of Sciences and Engineering; College of Engineering; Graduate School of Sciences and Engineering; College of Engineering; N/A; N/A; N/A; N/A; 308798As the tear is noninvasively and continuously available, it has been turned into a convenient biological interface as a wearable medical device for out-of-hospital and self-monitoring applications. Recent progress in integrated circuits (ICs) and biosensors coupled with wireless data communication techniques have led to the implementation of smart contact lenses that can continuously sample tear fluid, analyze physiological conditions, and wirelessly transmit data to an electronic device such as smartphone, which can send data to relevant healthcare units. Continuous analyte monitoring is one of the significant characteristics of wearable biosensors. However, despite several advantages over other on-skin wearable medical devices, batteries cannot be incorporated on smart contact lenses for continuous electrical power supply due to the limited area. Herein, we review the progress of power delivery techniques of smart contact lenses for the first time. Different approaches, including wireless power transmission (WPT), biofuel cells, supercapacitors, flexible batteries, wired connections, and hybrid methods, are thoroughly discussed to understand the principles of self-sustainable contact lens biosensors comprehensively. Additionally, recent progress in contact lens biosensors is reviewed in detail, thereby providing the prospects for further developments of smart contact lenses as a common biosensing platform for various disease monitoring and diagnostic applications.