Research Outputs
Permanent URI for this communityhttps://hdl.handle.net/20.500.14288/2
Browse
6 results
Search Results
Publication Metadata only An ultra-compact and wireless tag for battery-free sweat glucose monitoring(Elsevier Advanced Technology, 2022) N/A; Department of Mechanical Engineering; N/A; N/A; Department of Mechanical Engineering; N/A; N/A; N/A; N/A; Department of Mechanical Engineering; Mirzajani, Hadi; Abbasiasl, Taher; Mirlou, Fariborz; İstif, Emin; Bathaei, Mohammad Javad; Dağ, Çağdaş; Deyneli, Oğuzhan; Dereli, Dilek Yazıcı; Beker, Levent; Researcher; PhD Student; PhD Student; Other; PhD Student; Faculty Member; Faculty Member; Faculty Member; Faculty Member; Department of Mechanical Engineering; Koç Üniversitesi İş Bankası Enfeksiyon Hastalıkları Uygulama ve Araştırma Merkezi (EHAM) / Koç University İşbank Center for Infectious Diseases (KU-IS CID); n2STAR-Koç University Nanofabrication and Nanocharacterization Center for Scientifc and Technological Advanced Research; Koç University Research Center for Translational Medicine (KUTTAM) / Koç Üniversitesi Translasyonel Tıp Araştırma Merkezi (KUTTAM); College of Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; Graduate School of Sciences and Engineering; N/A; School of Medicine; School of Medicine; College of Engineering; N/A; N/A; N/A; N/A; N/A; N/A; 171914; 179659; 308798Glucose monitoring before, during, and after exercise is essential for people with diabetes as exercise increases the risk of activity-induced hyper- and hypo-glycemic events. The situation is even more challenging for athletes with diabetes as they have impaired metabolic control compared to sedentary individuals. In this regard, a compact and noninvasive wearable glucose monitoring device that can be easily worn is critical to enabling glucose monitoring. This report presents an ultra-compact glucose tag with a footprint and weight of 1.2 cm(2) and 0.13 g, respectively, for sweat analysis. The device comprises a near field communication (NFC) chip, antenna, electrochemical sensor, and microfluidic channels implemented in different material layers. The device has a flexible and conformal structure and can be easily attached to different body parts. The battery-less operation of the device was enabled by NFC-based wireless power transmission and the compact antenna. Femtosecond laser ablation was employed to fabricate a highly compact and flexible NFC antenna. The proposed device demonstrated excellent operating characteristics with a limit of detection (LOD), limit of quantification (LOQ), and sensitivity of 24 mu M, 74 mu M, and 1.27 mu A cm(-2) mM(-1), respectively. The response of the proposed sensor in sweat glucose detection and quantification was validated by nuclear magnetic resonance spectroscopy (NMR). Also, the device's capability in attachment to the body, sweat collection, and glucose measurement was demonstrated through in vitro and in vivo experiments, and satisfactory results were obtained.Publication Metadata only Detection of human kappa-opioid antibody using microresonators with integrated optical readout(Elsevier advanced Technology, 2010) N/A; N/A; N/A; N/A; Department of Mechanical Engineering; Department of Chemical and Biological Engineering; Department of Electrical and Electronics Engineering; Department of Mechanical Engineering; Timurdoğan, Erman; Özber, Natali; Nargül, Sezin; Yavuz, Serhat; Kılıç, M. Salih; Kavaklı, İbrahim Halil; Ürey, Hakan; Alaca, Burhanettin Erdem; PhD Student; Master Student; PhD Student; Master Student; Resercher; Faculty Member; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Department of Electrical and Electronics Engineering; Department of Mechanical Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; College of Engineering; College of Engineering; College of Engineering; N/A; N/A; N/A; N/A; N/A; 40319; 8579; 115108Label-free detection of the interaction between hexahistidine-tagged human kappa-opioid receptor membrane protein and anti-His antibody is demonstrated in liquid by an optical microelectromechanical system utilizing electromagnetically actuated microresonators Shift in resonance frequency due to accretion of mass on the sensitive surface of microresonators is monitored via an integrated optical readout a frequency resolution of 2 Hz is obtained Together with a sensitivity of 7 ppm/(ng/ml)) this leads to a minimum detectable antibody concentration of 57 ng/ml for a 50-kHz device the measurement principle is shown to impart immunity to environmental noise, facilitate operation in liquid media and bring about the prospect for further miniaturization of actuator and readout leading to a portable biochemical sensor.Publication Open Access Highly sensitive optical sensor for hydrogen gas based on a polymer microcylinder ring resonator(Elsevier, 2020) Eryürek, Mustafa; Department of Physics; Department of Chemistry; Department of Electrical and Electronics Engineering; Bavili, Nima; Balkan, Timuçin; Morova, Berna; Uysallı, Yiğit; Kaya, Sarp; Kiraz, Alper; Researcher; Researcher; PhD Student; Faculty Member; Faculty Member; Department of Physics; Department of Chemistry; Department of Electrical and Electronics Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); Graduate School of Sciences and Engineering; College of Sciences; College of Engineering; N/A; N/A; N/A; N/A; 116541; 22542A highly sensitive platform is demonstrated for hydrogen gas (H-2) sensing based on a polymer microcylinder ring resonator (PMRR) obtained by an optical fiber coated with an inner nanofilm of amorphous palladium (Pd) and an outer polymer layer of polydimethylsiloxane (PDMS) permeable to H-2. The sensing scheme is based on monitoring the spectral shifts of high-quality optical resonances called whispering gallery modes (WGMs) that propagate in the vicinity of the outer rim of the PDMS layer without being affected by the absorption and scattering losses caused by the Pd nanofilm. WGMs are excited by a single-mode tapered optical fiber evanescently coupled to the PMRR. The observed reversible spectral shifts of the WGMs are induced by changes in the diameter of the PDMS layer caused by expansion or contraction of the Pd nanofilm exposed to varying concentrations of H-2. Maximum spectral shift sensitivity of 140 pm/% H-2, a minimum response time of 95 s, and minimum limit of detection of similar to 60 ppm were measured for sensors prepared with different thicknesses of the amorphous Pd nanofilm and tested in the H-2 concentration range up to 1%, having nitrogen gas (N-2) as a carrier. Experiments were also conducted with Pd nanofilms annealed in air or N-2 atmosphere after the deposition. In both cases, smaller sensitivities were observed due to the formation of larger grains within the film, resulting in slower diffusion and reduced solubility of H in the Pd layer. The impacts of oxygen gas and humidity on sensor performance were also studied.Publication Metadata only Low-cost and reusable iron- and nickel-based metal boride nanoparticles for efficient catalytic hydrolysis of sodium borohydride(Pergamon-Elsevier Science Ltd, 2022) N/A; N/A; N/A; N/A; Department of Chemistry; Paksoy, Aybike; Öztulum, Samira Fatma Kurtoğlu; Yağcı, Mustafa Barış; Balcı, Özge; Master Student; PhD Student; Researcher; Researcher; Department of Chemistry; Koç University Boron and Advanced Materials Application and Research Center (KUBAM) / Koç Üniversitesi Bor ve İleri Malzemeler Uygulama ve Araştırma Merkezİ; Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; N/A; College of Sciences; N/A; 384798; N/A; 295531Development of efficient catalysts for hydrogen evolution reaction is of key importance for the safe storage and utilization of hydrogen from the hydrolysis of NaBH4. In this study, a series of nanocatalysts containing iron-and nickel-based metal borides were developed through a mechanochemical route followed by a wet milling step. The use of the mole ratio of metal chlorides to NaBH4 as 1:2 enabled the simultaneous formation of Ni3B and FeB phases, while the room-temperature synthesis method caused a uniform morphology with an average particle size and surface are of 70 nm and 41.8 m2/g, respectively. This powder showed the best catalytic performance compared to other samples with a hydrogen gen-eration rate value of 758 ml H2 min-1 gcat-1 at room temperature and an activation energy of 40.8 kJ/mol. The catalyst performed good durability for each cycle and retained about 70% of its initial catalytic activity after 5 cycles. The availability of active iron, nickel, and boron species on the surface contributed to the enhancement of catalytic activity. As -prepared catalysts can be considered as low-cost and reusable materials for the efficient hydrolysis of sodium borohydride.Publication Open Access Nanocrystalline cobalt-nickel-boron (metal boride) catalysts for efficient hydrogen production from the hydrolysis of sodium borohydride(Elsevier, 2021) N/A; Department of Chemical and Biological Engineering; Department of Chemistry; Paksoy, Aybike; Altıntaş, Zerrin; Khoshsima, Sina; Öztulum, Samira Fatma Kurtoğlu; Dizaji, Azam Khodadadi; Uzun, Alper; Balcı, Özge; Researcher; Researcher; Faculty Member; Researcher; Department of Chemical and Biological Engineering; Department of Chemistry; Koç University AKKİM Boron-Based Materials _ High-technology Chemicals Research _ Application Center (KABAM) / Koç Üniversitesi AKKİM Bor Tabanlı Malzemeler ve İleri Teknoloji Kimyasallar Uygulama ve Araştırma Merkezi (KABAM); Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; College of Engineering; College of Sciences; N/A; N/A; N/A; N/A; N/A; 59917; 295531Innovative metal boride nanocatalysts containing crystalline Co-Ni based binary/ternary boride phases were synthesized and used in the hydrolysis of NaBH4. All the as-prepared catalysts were in high-purity with average particle sizes ranging between similar to 51 and 94 nm and consisting of different crystalline phases (e.g. CoB, Co2B, Co5B16, NiB, Ni4B3, Ni2Co0-67B0.33). The synergetic effect of the different binary/ternary boride phases in the composite catalysts had a positive role on the catalytic performances thus, while the binary boride containing phases of unstable cobalt borides or single Ni4B3 were not showing any catalytic activity. The Co-Ni-B based catalyst containing crystalline phases of CoB-Ni4B3 exhibited the highest H-2 production rate (500.0 mL H-2 min(-1) g(cat)(-1)), with an apparent activation energy of 32.7 kJ/mol. The recyclability evaluations showed that the catalyst provides stability even after the 5th cycle. The results suggested that the composite structures demonstrate favorable catalytic properties compared to those of their single components and they can be used as alternative and stable catalysts for efficient hydrogen production from sodium borohydride.Publication Open Access Optimal design and operation of integrated microgrids under intermittent renewable energy sources coupled with green hydrogen and demand scenarios(Elsevier, 2022) Akülker, H.; Sildir, H.; Department of Chemical and Biological Engineering; Aydın, Erdal; Faculty Member; Department of Chemical and Biological Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); College of Engineering; Graduate School of Sciences and EngineeringRenewable energy integration into existing or new energy hubs together with Green technologies such as Power to Gas and Green Hydrogen has become essential because of the aim of keeping the average global temperature rise within 2 °C with regard to the Paris Agreement. Hence, all energy markets are expected to face substantial transitions worldwide. On the other hand, investigation of renewable energy systems integrated with green chemical conversion, and in particular combination of green hydrogen and synthetic methanation, is still a scarce subject in the literature in terms of optimal and simultaneous design and operation for integrated energy grids under weather intermittency and demand uncertainty. In fact, the integration of such promising new technologies has been studied mainly in the operational phase, without considering design and management simultaneously. Thus, in this work, a multi-period mixed-integer linear programming (MILP) model is formulated to deal with the aforementioned challenges. Under current carbon dioxide limitations dictated by the Paris Agreement, this model computes the best configuration of the renewable and non-renewable-based generators, their optimal rated powers, capacities and scheduling sequences from a large candidate pool containing thirty-nine different equipment simultaneously. Moreover, the effect of the intermittent nature of renewable resources is analyzed comprehensively under three different scenarios for a specific location. Accordingly, a practical scenario generation method is proposed in this work. It is observed that photovoltaic, oil co-generator, reciprocating ICE, micro turbine, and bio-gasifier are the equipment that is commonly chosen under the three different scenarios. Results also show that concepts such as green hydrogen and power-to-gas are currently not preferable for the investigated location. On the other hand, analysis shows that if the emission limits are getting tightened, it is expected that constructing renewable resource-based grids will be economically more feasible.