Publication:
A novel hybrid model for prediction of distortions in milling

Simple item page
dc.contributor.departmentMARC (Manufacturing and Automation Research Center)
dc.contributor.facultymemberYes
dc.contributor.kuauthorLazoğlu, İsmail
dc.contributor.kuauthorAkhtar, Waseem
dc.contributor.schoolcollegeinstituteResearch Center
dc.date.accessioned2025-01-19T10:27:52Z
dc.date.issued2023
dc.description.abstractDistortion of machined monolithic thin-walled parts is a well-known issue and a perpetual concern in the aerospace industry. In this article, a novel analytical-FEM hybrid model for fast prediction of distortion of thin-walled parts is proposed. Moving cutting loads due to milling are calibrated and applied directly to the surface of the meshed model. The effects of measured initial stresses in the workpiece as well as cutting forces and heat flux are effectively modeled. Validation tests carried out on the aerospace alloy Al7050-T7451 showed the promise of the model in predicting the distortion of the part.
dc.description.fulltextNo
dc.description.harvestedfromManual
dc.description.indexedbyWOS
dc.description.indexedbyScopus
dc.description.openaccessN/A
dc.description.peerreviewstatusPeer-Reviewed
dc.description.publisherscopeInternational
dc.description.readpublishN/A
dc.description.sponsoredbyTubitakEuN/A
dc.description.sponsorshipThe authors would like to thank Siemens for supporting this research via Ko , cUniversity Siemens IoT Edge Research Laboratory and thank Ar , c elik A. , S. for the WEDM support.
dc.description.studentonlypublicationNo
dc.description.studentpublicationYes
dc.description.versionN/A
dc.identifier.WoSQuartileQ2
dc.identifier.doi10.1016/j.cirp.2023.04.052
dc.identifier.eissn1726-0604
dc.identifier.embargoN/A
dc.identifier.endpage76
dc.identifier.issn0007-8506
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85152357128
dc.identifier.startpage73
dc.identifier.urihttps://doi.org/10.1016/j.cirp.2023.04.052
dc.identifier.urihttps://hdl.handle.net/20.500.14288/25626
dc.identifier.volume72
dc.identifier.wos001054413700001
dc.keywordsDeformation
dc.keywordsPredictive model
dc.keywordsMilling
dc.language.isoeng
dc.publisherElsevier
dc.relation.affiliationKoç University
dc.relation.collectionKoç University Institutional Repository
dc.relation.ispartofCirp Annals-Manufacturing Technology
dc.relation.openaccessN/A
dc.rightsN/A
dc.subjectIndustrial engineering
dc.subjectManufacturing engineering
dc.titleA novel hybrid model for prediction of distortions in milling
dc.typeJournal Article
dspace.entity.typePublication
local.contributor.kuauthorAkhtar, Waseem
local.contributor.kuauthorLazoğlu, İsmail
relation.isOrgUnitOfPublication52df3968-be7f-4c06-92e5-3b48e79ba93a
relation.isOrgUnitOfPublication.latestForDiscovery52df3968-be7f-4c06-92e5-3b48e79ba93a
relation.isParentOrgUnitOfPublicationd437580f-9309-4ecb-864a-4af58309d287
relation.isParentOrgUnitOfPublication.latestForDiscoveryd437580f-9309-4ecb-864a-4af58309d287

Files

Collections

Publications without Fulltext