Increasing productivity in sculpture surface machining via off-line piecewise variable feedrate scheduling based on the force system model

Abstract

Sculpture surface machining is a critical process commonly used in various industries such as the automobile, aerospace, die/mold industries. Since there is a lack of scientific tools in practical process planning stages, feedrates for CNC machining are selected based on the trial errors and previous experiences. In the selections of the process parameters, production-planning engineers are conservative in order to avoid undesirable results such as chipping, cutter breakage or over-cut due to excessive cutter deflection. Currently, commonly used CAD/CAM programs use only the geometric and volumetric analysis, but not the physics of the processes, and rely on experience based cutting tool database and users' inputs for selection of the process parameters such as feed and speed. Usually, the feeds and cutting speeds are set individual constant values all along the roughing, semi-finishing, and finishing processes. Being too conservative and setting feedrate constant all along the tool path in machining of sculpture surfaces can be quite costly for the manufacturers. However, a force model based on the physics of the cutting process will be greatly beneficial for varying the feedrate piecewise along the tool path. The model presented here is the first stage in order to integrate the physics of the ball-end milling process into the selection of the feeds during the sculpture surface machining. Therefore, in this paper, an enhanced mathematical model is presented for the prediction of cutting force system in ball end milling of sculpture surfaces. This physical force model is used for selecting varying and 'appropriate' feed values along the tool path in order to decrease the cycle time in sculpture surface machining. The model is tested under various machining conditions, and some of the results are also presented in the paper. (C) 2003 Elsevier Ltd. All rights reserved.