Publication:
Carbon aerogel supported nickel nanoparticles and nanorods using supercritical deposition

Placeholder

School / College / Institute

Program

KU Authors

Co-Authors

Zhang, L. C.
Aindow, M.

Publication Date

Language

Embargo Status

Journal Title

Journal ISSN

Volume Title

Alternative Title

Abstract

Carbon aerogel (CA)-nickel nanocomposites were synthesized by impregnating the CAs with nickel(II) acetylacetonate (Ni(acac)(2)) from supercritical carbon dioxide at 30 MPa and 60 degrees C followed by thermal or chemical treatment using H-2 at atmospheric pressure. The CA-Ni(acac)(2)-CO2 adsorption isotherm was measured at the impregnation condition and found to be linear. The decomposition of Ni(acac)(2) on the CA surface was investigated using thermo-gravimetry and mass-spectroscopy. Propane was found in the gaseous decomposition products. CA-Ni composites were characterized using Infrared (IR) Spectroscopy and characteristic Ni(acac)(2) peaks were found to disappear after thermal or chemical treatments. Xray diffraction (XRD) data confirmed that after H-2 treatments nickel nanocrystals were present in the CA. Transmission electron microscopy (TEM) revealed the presence of nickel nanostructures dispersed homogeneously on the surface of the CA. In the samples treated with H-2 at 170 degrees C, the average Ni nanoparticle size increased from 4.9 to 12.9 nm when the Ni loading increased from 3 to 6.5 wt.%. The H-2 treatment at 200 degrees C resulted in Ni nanorods with diameters of 7-11 nm and lengths of 25-50 nm dispersed throughout the CA surface. (c) 2012 Elsevier B.V. All rights reserved.

Source

Publisher

Elsevier Science Bv

Subject

Chemistry, Physical, Engineering, Chemical engineering

Citation

Has Part

Source

Journal of Supercritical Fluids

Book Series Title

Edition

DOI

10.1016/j.supflu.2012.02.027

item.page.datauri

Link

Rights

Copyrights Note

Endorsement

Review

Supplemented By

Referenced By

0

Views

0

Downloads

View PlumX Details