Research Outputs
Permanent URI for this communityhttps://hdl.handle.net/20.500.14288/2
Browse
850 results
Search Results
Publication Metadata only 1.07 - Rubberlike elasticity(Elsevier, 2012) Mark, J.E.; Department of Chemical and Biological Engineering; Erman, Burak; Faculty Member; Department of Chemical and Biological Engineering; College of Engineering; 179997Molecular structure, molecular and phenomenological theories, and computer simulations of amorphous rubberlike polymeric networks of rubber elasticity are discussed. Behavior of responsive gels, multimodal, liquid-crystalline, and reinforced elastomers in the state of thermodynamic equilibrium are outlined. Characterization of structure and properties based on stress–strain experiments, optical and spectroscopic techniques, scanning tunneling microscopy, atomic force microscopy, nuclear magnetic resonance, small-angle and Brillouin scattering, and pulse wave propagation are outlined. © 2012 Elsevier B.V. All rights reserved.Publication Metadata only 2d -> 3d polycatenated and 3d -> 3d interpenetrated metal-organic frameworks constructed from thiophene-2,5-dicarboxylate and rigid bis(imidazole) ligands(Elsevier, 2014) Erer, Hakan; Yesilel, Okan Zafer; Arici, Mursel; Buyukgungor, Orhan; Department of Chemical and Biological Engineering; Keskin, Seda; Faculty Member; Department of Chemical and Biological Engineering; College of Engineering; 40548Hydrothermal reactions of rigid 1,4-bis(imidazol-1-yl)benzene (dib) and 1,4-bis(imidazol-1-yl)-2, 5-dimethylbenzene (dimb) with deprotonated thiophene-2,5-dicarboxylic acid (H(2)tdc) in the presence of Zn(II) and Cd(II) salts in H2O produced three new metal-organic frameworks, namely, [Zn(mu-tdc)(H2O) (mu-dib)](n) (1), [Cd(mu-tdc)(H2O)(mu-dib)(n) (2), and {[Cd-2(mu(3)-tdc)(2)(mu-dimb)(2)] center dot (H2O)}(n) (3). These MOFs were characterized by FT-IR spectroscopy, elemental, thermal (TG, DTA, DTG and DSC), and single-crystal X-ray diffraction analyses. Isomorphous complexes 1 and 2 reveal polycatenated 2D+2D -> 3D framework based on an undulated (4,4)-sql layer. Complex 3 exhibits a new 4-fold interpenetrating 3D framework with the point symbol of 6(6). Molecular simulations were used to assess the potentials of the complexes for H-2 storage application. Moreover, these coordination polymers exhibit blue fluorescent emission bands in the solid state at room temperature.Publication Metadata only 3D printed poly(lactic acid) scaffolds modified with chitosan and hydroxyapatite for bone repair applications(Elsevier, 2020) N/A; N/A; N/A; N/A; Department of Chemistry; Department of Chemical and Biological Engineering; Department of Chemistry; Nazeer, Muhammad Anwaar; Önder, Özgün Can; Sevgili, İlkem; Yılgör, Emel; Kavaklı, İbrahim Halil; Yılgör, İskender; PhD Student; PhD Student; PhD Student; Researcher; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Department of Chemistry; Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Sciences; College of Engineering; College of Sciences; N/A; N/A; N/A; N/A; 40319; 241813D printed poly(lactic acid) (PLA) scaffolds surface modified with chitosan (CS) and hydroxyapatite (HA) to produce a novel bioactive composite scaffold is reported. Excellent mechanical properties of PLA, the bioactivity of CS, and osteogenic characteristics of HA are combined to fabricate composite scaffolds using a simple desktop 3D printer. Scaffolds were characterized through attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD) and water contact angle measurements before and after modification. Formic acid was used as a solvent to prepare stable CS/HA dispersions and was found to be a suitable solvent for producing PLA/CS/HA composites. Surface properties of modified scaffolds were superior in terms of hydrophilicity and bioactivity, which resulted in enhanced attachment and proliferation of human osteosarcoma cells in vitro compared to the unmodified PLA scaffolds.Publication Metadata only 3D printing of cytocompatible gelatin-cellulose-alginate blend hydrogels(Wiley-V C H Verlag Gmbh, 2020) Erkoc, Pelin; Uvak, Ileyna; Odeh, Yazan Nitham; Akdogan, Ozan; Odeh, Yazan Nitham; Akdogan, Ozan; N/A; Department of Chemistry; Department of Chemical and Biological Engineering; Nazeer, Muhammad Anwaar; Batool, Syeda Rubab; Kızılel, Seda; PhD Student; Researcher; Faculty Member; Department of Chemistry; Department of Chemical and Biological Engineering; Graduate School of Sciences and Engineering; College of Sciences; College of Engineering; N/A; N/A; 283763D bioprinting of hydrogels has gained great attention due to its potential to manufacture intricate and customized scaffolds that provide favored conditions for cell proliferation. Nevertheless, plain natural hydrogels can be easily disintegrated, and their mechanical strengths are usually insufficient for printing process. Hence, composite hydrogels are developed for 3D printing. This study aims to develop a hydrogel ink for extrusion-based 3D printing which is entirely composed of natural polymers, gelatin, alginate, and cellulose. Physicochemical interactions between the components of the intertwined gelatin-cellulose-alginate network are studied via altering copolymer ratios. The structure of the materials and porosity are assessed using infrared spectroscopy, swelling, and degradation experiments. The utility of this approach is examined with two different crosslinking strategies using glutaraldehyde or CaCl2. Multilayer cylindrical structures are successfully 3D printed, and their porous structure is confirmed by scanning electron microscopy and Brunauer-Emmett-Teller surface area analyses. Moreover, cytocompatibility of the hydrogel scaffolds is confirmed on fibroblast cells. The developed material is completely natural, biocompatible, economical, and the method is facile. Thus, this study is important for the development of advanced functional 3D hydrogels that have considerable potential for biomedical devices and artificial tissues.Publication Open Access 3D spatial organization and network-guided comparison of mutation profiles in Glioblastoma reveals similarities across patients(Public Library of Science, 2019) Dinçer, Cansu; Kaya, Tuğba; Tunçbağ, Nurcan; Department of Chemical and Biological Engineering; Department of Computer Engineering; Keskin, Özlem; Gürsoy, Attila; Faculty Member; Department of Chemical and Biological Engineering; Department of Computer Engineering; Koç University Research Center for Translational Medicine (KUTTAM) / Koç Üniversitesi Translasyonel Tıp Araştırma Merkezi (KUTTAM); College of Engineering; 26605; 8745Glioblastoma multiforme (GBM) is the most aggressive type of brain tumor. Molecular heterogeneity is a hallmark of GBM tumors that is a barrier in developing treatment strategies. In this study, we used the nonsynonymous mutations of GBM tumors deposited in The Cancer Genome Atlas (TCGA) and applied a systems level approach based on biophysical characteristics of mutations and their organization in patient-specific subnetworks to reduce inter-patient heterogeneity and to gain potential clinically relevant insights. Approximately 10% of the mutations are located in "patches" which are defined as the set of residues spatially in close proximity that are mutated across multiple patients. Grouping mutations as 3D patches reduces the heterogeneity across patients. There are multiple patches that are relatively small in oncogenes, whereas there are a small number of very large patches in tumor suppressors. Additionally, different patches in the same protein are often located at different domains that can mediate different functions. We stratified the patients into five groups based on their potentially affected pathways, revealed from the patient-specific subnetworks. These subnetworks were constructed by integrating mutation profiles of the patients with the interactome data. Network-guided clustering showed significant association between each group and patient survival (P-value = 0.0408). Also, each group carries a set of signature 3D mutation patches that affect predominant pathways. We integrated drug sensitivity data of GBM cell lines with the mutation patches and the patient groups to analyze the therapeutic outcome of these patches. We found that Pazopanib might be effective in Group 3 by targeting CSF1R. Additionally, inhibiting ATM that is a mediator of PTEN phosphorylation may be ineffective in Group 2. We believe that from mutations to networks and eventually to clinical and therapeutic data, this study provides a novel perspective in the network-guided precision medicine.Publication Metadata only [BMIM] [PF6] incorporation doubles CO2 selectivity of ZIF-8: elucidation of interactions and their consequences on performance(Amer Chemical Soc, 2016) N/A; N/A; N/A; N/A; N/A; Department of Chemical and Biological Engineering; Department of Chemical and Biological Engineering; Kınık, Fatma Pelin; Altıntaş, Çiğdem; Balcı, Volkan; Koyutürk, Burak; Uzun, Alper; Keskin, Seda; Master Student; Researcher; PhD Student; Master Student; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; College of Engineering; N/A; N/A; N/A; N/A; 59917; 40548Experiments were combined with atomically detailed simulations and density functional theory (DFT) calculations to understand the effect of incorporation of an ionic liquid (IL), 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), into a metal organic framework (MOF with a zeolitic imidazolate framework), ZIF-8, on the CO2 separation performance. The interactions between [BMIM] [PF6] and ZIF-8 were examined in deep detail, and their consequences on CO2/CH4, CO2/N-2, and CH4/N-2 separation have been elucidated by using experimental measurements complemented by DFT calculations and atomically detailed simulations. Results suggest that IL-MOF interactions strongly affect the gas affinity of materials at low pressure, whereas available pore volume plays a key role for gas adsorption at high pressures. Direct interactions between IL and MOF lead to at least a doubling of CO2/CH4 and CO2/N-2 selectivities of ZIF-8. These results provide opportunities for rational design and development of IL-incorporated MOFs with exceptional selectivity for target gas separation applications.Publication Metadata only [BMIM][OAc] coating layer makes activated carbon almost completely selective for CO2(Elsevier Science Sa, 2022) N/A; N/A; Department of Chemical and Biological Engineering; Department of Chemical and Biological Engineering; Durak, Özce; Zeeshan, Muhammad; Keskin, Seda; Uzun, Alper; Master Student; PhD Student; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; Koç University Tüpraş Energy Center (KUTEM) / Koç Üniversitesi Tüpraş Enerji Merkezi (KÜTEM); Koç University Surface Science and Technology Center (KUYTAM) / Koç Üniversitesi Yüzey Teknolojileri Araştırmaları Merkezi (KUYTAM); Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; College of Engineering; N/A; N/A; 40548; 59917Tuning the molecular affinity of porous materials towards desired gases is important to achieve superior selectivity for a target separation. Herein, we report a novel composite, prepared by coating an ordinary activated carbon (AC) with an ionic liquid (IL) (1-butyl-3-methylimidazolium acetate, [BMIM][OAc]) offering an almost complete CO2 selectivity over N-2 and CH4. Data indicated that pore blockage by the IL accompanied with the enhancement in polarity and reduction in the hydrophobic character of the surface hindered the sorption of N-2 and CH4. For CO2, on the other hand, new chemisorption and physisorption sites became available associated with the IL layer on the surface, making the composite material significantly selective. Newly formed chemisorption sites attributed to the cation's acidic C2H sites, which become available with bi-layer formation. Presence of multiple competitive sorption sites with different energies was further proven with thermal analysis and detailed spectroscopic analysis. Data showed that CO2/CH4 and CO2/N-2 ideal selectivities boosted from 3.3 to 688.3 (2.3 to 54.7) and from 15.6 to 903.7 (7.1 to 74.3) at 0.1 (1) bar and 25 degrees C, respectively, upon the deposition of IL layer. Especially at lower pressures, the IL/AC material became almost fully selective for CO2 offering ideal selectivities in the order of several tens of thousands. To the best of our knowledge, the remarkable enhancement in the ideal CO2 selectivity by a straightforward post-synthesis modification of an ordinary AC, as reported here, sets a new benchmark in high-performance and efficient gas separation for similar porous materials.Publication Open Access A cartridge based sensor array platform for multiple coagulation measurements from plasma(Royal Society of Chemistry (RSC), 2015) Bulut, Serpil; Yaralioglu, G. G.; Department of Electrical and Electronics Engineering; Department of Molecular Biology and Genetics; Department of Chemical and Biological Engineering; Çakmak, Onur; Ermek, Erhan; Kılınç, Necmettin; Barış, İbrahim; Kavaklı, İbrahim Halil; Ürey, Hakan; PhD Student; Other; Researcher; Teaching Faculty; Faculty Member; Department of Electrical and Electronics Engineering; Department of Molecular Biology and Genetics; Department of Chemical and Biological Engineering; College of Engineering; Graduate School of Sciences and Engineering; College of Sciences; N/A; 109991; N/A; 111629; 40319; 8579This paper proposes a MEMS-based sensor array enabling multiple clot-time tests for plasma in one disposable microfluidic cartridge. The versatile LoC (Lab-on-Chip) platform technology is demonstrated here for real-time coagulation tests (activated Partial Thromboplastin Time (aPTT) and Prothrombin Time (PT)). The system has a reader unit and a disposable cartridge. The reader has no electrical connections to the cartridge. This enables simple and low-cost cartridge designs and avoids reliability problems associated with electrical connections. The cartridge consists of microfluidic channels and MEMS microcantilevers placed in each channel. The microcantilevers are made of electroplated nickel. They are actuated remotely using an external electro-coil and the read-out is also conducted remotely using a laser. The phase difference between the cantilever oscillation and the coil drive is monitored in real time. During coagulation, the viscosity of the blood plasma increases resulting in a change in the phase read-out. The proposed assay was tested on human and control plasma samples for PT and aPTT measurements. PT and aPTT measurements from control plasma samples are comparable with the manufacturer's datasheet and the commercial reference device. The measurement system has an overall 7.28% and 6.33% CV for PT and aPTT, respectively. For further implementation, the microfluidic channels of the cartridge were functionalized for PT and aPTT tests by drying specific reagents in each channel. Since simultaneous PT and aPTT measurements are needed in order to properly evaluate the coagulation system, one of the most prominent features of the proposed assay is enabling parallel measurement of different coagulation parameters. Additionally, the design of the cartridge and the read-out system as well as the obtained reproducible results with 10 mu l of the plasma samples suggest an opportunity for a possible point-of-care application.Publication Metadata only A CLOCK-binding small molecule disrupts the interaction between CLOCK and BMAL1 and enhances circadian rhythm amplitude(Elsevier, 2020) Akyel, Yasemin Kübra; Yılmaz, Fatma; Öztürk, Nuri; Öztürk, Narin; Okyar, Alper; N/A; N/A; Department of Chemical and Biological Engineering; N/A; Department of Molecular Biology and Genetics; Department of Industrial Engineering; Department of Chemical and Biological Engineering; Doruk, Yağmur Umay; Yarparvar, Darya; Gül, Şeref; Taşkın, Ali Cihan; Barış, İbrahim; Türkay, Metin; Kavaklı, İbrahim Halil; Master Student; PhD Student; Researcher; Other; Teaching Faculty; Faculty Member; Faculty Member; Department of Molecular Biology and Genetics; Department of Industrial Engineering; Department of Chemical and Biological Engineering; Graduate School of Sciences and Engineering; Graduate School of Sciences and Engineering; College of Engineering; N/A; College of Sciences; College of Engineering; College of Engineering; N/A; N/A; N/A; 291296; 111629; 24956; 40319Proper function of many physiological processes requires a robust circadian clock. Disruptions of the circadian clock can result in metabolic diseases, mood disorders, and accelerated aging. Therefore, identifying small molecules that specifically modulate regulatory core clock proteins may potentially enable better management of these disorders. In this study, we applied a structure-based molecular-docking approach to find small molecules that specifically bind to the core circadian regulator, the transcription factor circadian locomotor output cycles kaput (CLOCK). We identified 100 candidate molecules by virtual screening of ?2 million small molecules for those predicted to bind closely to the interface in CLOCK that interacts with its transcriptional co-regulator, Brain and muscle Arnt-like protein-1 (BMAL1). Using a mammalian two-hybrid system, real-time monitoring of circadian rhythm in U2OS cells, and various biochemical assays, we tested these compounds experimentally and found one, named CLK8, that specifically bound to and interfered with CLOCK activity. We show that CLK8 disrupts the interaction between CLOCK and BMAL1 and interferes with nuclear translocation of CLOCK both in vivo and in vitro. Results from further experiments indicated that CLK8 enhances the amplitude of the cellular circadian rhythm by stabilizing the negative arm of the transcription/translation feedback loop without affecting period length. Our results reveal CLK8 as a tool for further studies of CLOCK's role in circadian rhythm amplitude regulation and as a potential candidate for therapeutic development to manage disorders associated with dampened circadian rhythms.Publication Open Access A comparative molecular dynamics study of methylation state specificity of JMJD2A(Public Library of Science, 2011) Bozfakioğlu S.; Uğurel, Elif; Sinan, M.; Department of Chemical and Biological Engineering; Keskin, Özlem; Erman, Burak; Gürsoy, Attila; Faculty Member; Faculty Member; Department of Chemical and Biological Engineering; College of Sciences; College of Engineering; 26605; 179997; N/AHistone modifications have great importance in epigenetic regulation. JMJD2A is a histone demethylase which is selective for di- and trimethyl forms of residues Lys9 and Lys36 of Histone 3 tail (H3K9 and H3K36). We present a molecular dynamics simulations of mono-, di- and trimethylated histone tails in complex with JMJD2A catalytic domain to gain insight into how JMJD2A discriminates between the methylation states of H3K9. The methyl groups are located at specific distances and orientations with respect to Fe(II) in methylammonium binding pocket. For the trimethyllysine the mechanism which provides the effectual orientation of methyl groups is the symmetry, whereas for the dimethyllysine case the determining factors are the interactions between methyllysine head and its environment and subsequently the restriction on angular motion. The occurrence frequency of methyl groups in a certain proximity of Fe(II) comes out as the explanation of the enzyme activity difference on di-and tri-methylated peptides. Energy analysis suggests that recognition is mostly driven by van der Waals and followed by Coulombic interactions in the enzyme-substrate interface. The number (mono, di or tri) and orientations of methyl groups and water molecules significantly affect the extent of van der Waals interaction strengths. Hydrogen bonding analysis suggests that the interaction between JMJD2A and its substrates mainly comes from main chain-side chain interactions. Binding free energy analysis points out Arg8 as an important residue forming an intra-substrate hydrogen bond with tri and dimethylated Lys9 of the H3 chain. Our study provides new insights into how JMJD2A discriminates between its substrates from both a structural and dynamical point of view.