Fixation methods in latarjet: biomechanical comparison of screw types and plate fixatıon

Abstract

Objective: Latarjet procedure is often preferred in recurrent shoulder dislocations accompanied by glenoid bone loss. It is observed that the superiority of bone graft fixation methods is still controversial. The aim of this study is to biomechanically compare the bone graft fixation methods in the Latarjet procedure. Methods: 15 third- generation scapula bone models were divided into 3 groups. Graft was fixated in the first group with fully-threaded cortical screws of 3.5mm diameter, in the second group two 16 mm partially-threaded cannulated screws of 4.5mm diameter, and in the third group via a mini plate and screw. The hemispherical humeral head was placed on the tip of the cyclic charge device, and thus, the charge applied to the coracoid graft was homogeneous. Results: No statistically significant difference was found between paired comparisons (p>0.05). The forces in 5 mm displacement in total vary between 502-857N. Total stiffness measurements ranged between 105 and 625; the mean value was 258.13 +/- 53.54 with no statistically significant difference by groups (p = 0.958). Conclusion: This biomechanical study showed that there is no difference between three coracoid fixation options in terms of fixation strength. Unlike previous assumptions, plate fixation is not biomechanically superior to screw fixation. Surgeons should consider their personal preferences and experience in choosing fixation methods.